EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Serbuk keluli tahan karat AISI 410 untuk percetakan 3D
Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it's been hardened, tempered, and then polished.
Penerangan Produk
Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloy 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It is a general purpose grade that is often supplied in the hardened but still machineable condition for applications where high strength and moderate heat and corrosion resistance are required. Alloy 410 displays maximum corrosion resistance when it’s been hardened, tempered, and then polished.
Maklumat umum
| Tempat Asal: | Changsha, China |
| jenama: | HLPOWDER |
| Item: | AISI 410 |
| Saiz zarah: | 15-53μm/ 15-45μm |
| Persijilan: | ISO9001, ISO14001 |
| Kuantiti Pesanan Minima: | 20kg |
| Pembungkusan Details: | Tong besi |
| Masa Penghantaran: | Hari 7-10 |
Aplikasi
● Aeroangkasa
● Industri Automotif
● Implan dan Peranti Perubatan
● Alatan dan Acuan Industri
● Kejuruteraan Ketepatan
● Mechanical and Engineering
● Penyesuaian
spesifikasi
Komposisi kimia:
| Aloi | Cr | Ni | Si | Mn | C | Fe |
| 410 | 11.50-13.50 | ≤ 0.60 | ≤ 1.00 | ≤ 1.00 | ≤ 0.15 | Bal |
Nota: Serbuk percetakan 3D lain boleh didapati atas sebarang keperluan penyesuaian.
Saiz Zarah:
| saiz zarah | Kepekaan mengetuk | Kebolehaliran | Taburan Saiz Zarah | ||
| D10 | D50 | D90 | |||
| 15-45μm | ≥4.5 | ≤ 20 | 15-22 | 26-35 | 46-55 |
| 15-53μm | ≥4.5 | ≤ 20 | 16-26 | 30-38 | 52-58 |
Nota: Serbuk percetakan 3D lain boleh didapati atas sebarang keperluan penyesuaian.
Ciri-ciri Serbuk
● Kesferaan Tinggi & Kebolehaliran Tinggi
● Low oxygen content
● Atomisasi Gas dengan Nitrogen
Pakej
Untuk Percetakan 3D: Setiap Pakej PE + tin 20Kg atau Tong 25Kg/50Kg atau Tong 250Kg.
