EN 
CN
FR
DE
HI
IT
JA
KO
RU
ES
Serbuk berasaskan nikel Inconel625 untuk percetakan 3D
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Penerangan Produk
Inconel 625 is a nickel-based super alloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, as well as being able to resist corrosion while being exposed to highly acidic environments makes it a fitting choice for nuclear and marine applications.
Maklumat umum
| Tempat Asal: | Changsha, China |
| jenama: | HLPOWDER |
| Item: | Inconel625 |
| Saiz zarah: | 15-53μm |
| Persijilan: | ISO9001, ISO14001 |
| Kuantiti Pesanan Minima: | 20kg |
| Pembungkusan Details: | Tong besi |
| Masa Penghantaran: | Hari 7-10 |
Aplikasi
● Petrokimia
● Kejuruteraan Marin
● Automotif
● Aeroangkasa
● Pembuatan Peranti Perubatan
spesifikasi
GH3625(Inconel625):
| Perkara | C | Si | Mn | Ni | Cr | Co | Mo | Al | Ti | Cu | Nb | P | S |
| GH3625 | ≤ 0.1 | ≤ 0.5 | ≤ 0.5 | Bal | 20.0-23.0 | ≤ 1.0 | 8.0-10.0 | ≤ 0.4 | ≤ 0.4 | ≤ 0.07 | 3.15-4.15 | ≤ 0.015 | ≤ 0.015 |
Saiz Zarah:
| saiz zarah | Kepekaan mengetuk | Kebolehaliran | Taburan Saiz Zarah | ||
| D10 | D50 | D90 | |||
| 15-53μm | ≥4.5 | ≤ 20 | 16-26 | 30-38 | 52-58 |
Sifat-sifat bahagian:
| Ketumpatan Bahagian (g/cm³) | ≥8.4 |
| Dicetak (xy) | |
| Kekuatan tegangan (MPa) | ≥930 |
| Kekuatan Hasil (MPa) | ≥660 |
| Pemanjangan A10 (%) | ≥25 |
| Kekerasan HV/HRC | ≥260 HV5/15 |
Ciri-ciri Serbuk
● Kesferaan Tinggi & Kebolehaliran Tinggi
● Kandungan oksigen yang rendah
Pakej
Untuk Percetakan 3D: Setiap Pakej PE + tin 20Kg atau Tong 25Kg/50Kg atau Tong 250Kg.
